You are here:
First Generation Firebird > 1968 Pontiac Firebird Page > Technical Information > AMA Specifications Index > Suspension

'68 AMA Specifications - Suspension

AMA Specifications-Passenger Car
--- Suspension ---



MODEL Firebird Firebird
Sprint
Firebird
350
Firebird
H.O.
Firebird
400
Suspension - General
Provision for car leveling None
Provision for brake dip control Front Suspension Geometry
Provision for acc. squat control Rear Suspension Geometry
Special provisions for
car jacking
Jack Locating Provisions on Front and Rear bumpers
Shock
Absorber
Front &
Rear
Type Direct Acting - Two Way
Make Delco
Piston dia. 1.00
Other Special features Firm Control Shock Absorbers Included in
Firm Ride and Handling Option
Suspension - Front
Type and description Ball joint independent front suspension with upper and
lower control arms mounted on rubber bushings.
Spring Type Coil
Material Alloy Steel
Size (coil design height & I.D.
bar length x dia.)
11.40 x 3.60
Spring rate (lb. per in.) 275 Std. 22337 - 320 & 345 (a)
Rate at wheel (lb. per in.) 73 Std. 22337 - 85 & 92 (a)
Stabilizer Type (link, linkless, frameless)
Link
Material & bar diameter
Alloy Steel, 0.6875
Suspension - Rear
Type and description Hotchkiss Drive
Drive and torque taken through Rear Springs
Spring Type Multi-Leaf
Material Alloy Steel
Size (coil design height & I.D.
bar length x dia.)
56.0 x 2.50
Spring rate (lb. per in.) 82 Std. 22337 - 79, 89, 99, 118, & 122 (a)
Rate at wheel (lb. per in.) 83 Std. 22337 - 80, 90, 100, 119, & 123 (a)
Mounting insulation type Rubber Bushings
If leaf No. of leaves 4 & 5
Shockle (comp. or trans.) Compression
Stabilizer Type (link, linkless, framless) Not Used
Material None
Track bar type Not Used
NOTES:
(a) Alternate springs used as required for body styles and optional equipment.



[Return to AMA Specifications ---Index---]
This file last modified Sunday, 29-Jun-2008 11:47:46 PDT